ATLAS BLOG

  • Atlas Minerals and Chemicals

Is There Grout Missing from Your Brick and Tile Floor Joints?


ATLAS® EPOXY GROUTS are the answer for you!


Atlas Minerals & Chemicals, Inc. offers a vast variety of Epoxy Grouts for brick and tile floor installations, new and existing. Our Epoxy Grouts are:

  • Water Washable

  • Easy to Apply and Clean Up

  • Resistant to organic food acids, caustics and sanitizing cleaners

  • Does not support Bacterial Growth

  • Withstands wash downs as hot as 212°F.

  • Supports foot traffic in just hours!

  • USDA Acceptable

Here are just a few tips to help make your existing brick or tile floor look new again.

  1. Select the right grout by contacting ATLAS to review operating conditions of the floor and the SDS’ of the cleaning and sanitizing compounds used.

  2. Clean existing floor to remove all oils, greases, fats and other contaminates.

  3. Remove excess or standing water.

  4. Saw cut existing grout joints to a minimum 3/8” depth and remove all debris and residual dust.

  5. Install the grout in accordance with specific product specification sheets.

  6. Begin water-washing the tile or brick surface immediately to eliminate any epoxy haze from forming on the surface.


EPOXY GROUTS BY ATLAS


ATLAS EPOXY GROUT

  • All Purpose Epoxy

  • Low viscosity, perfect for regrouting tight joints

  • Water-Washable

  • ANSI 118.3 Compliant


REZKLAD® WATER WASHABLE GROUT

  • Epoxy Resin Based

  • Water-Washable

  • Can be used as a setting bed for brick and tile

  • ANSI 118.3 Compliant


REZKLAD® SG GROUT

  • Epoxy Hybrid Resin Based

  • Economical Choice for commercial kitchen applications

  • Water-Washable


REZKLAD® WALL GROUT

  • Epoxy Resin Based

  • Formulated for Vertical Applications, such as Structural Glazed and Porcelain Wall Tiles

  • Water-Washable


REZKLAD® HP GROUT

  • Epoxy Novolac Resin Based

  • Does not support Bacterial Growth

  • Water-Washable

  • Can be used as a setting bed for brick and tile

  • ANSI 118.3 Compliant


REZKLAD® HP GROUT LT

  • Epoxy Novolac Resin Based

  • Designed to cure at temperatures down to 34°F.

  • Water-Washable

  • Rapid Setting when used at 70°F. or above

REZKLAD® HP GROUT C

  • Carbon-Filled, Epoxy Novolac Resin Based

  • Excellent Chemical Resistance to Organic Solvents and Oxidizing Acids and Agents

  • Available in Low Temperature Formulation

  • Water-Washable

ATLAS maintains a technical service staff which will be happy to send you additional information or discuss your Flooring needs. Individual Data Sheets for all products described are available upon request.



18 views