top of page

CCM - Linings and Membranes
MEMBRANES

Used in conjunction with brick and mortar to provide secondary layer of protection. For more information on brick and tile floor construction, click here.

MEMBRANES

Atlastic 40

  • Hot applied, reinforced modified asphalt 

  • Maximum temperature at brick / membrane interface is 150°F (66°C)

  • Resistant to many acids, alkalines, and salts

Data Sheet

MEMBRANES

Atlastic 50

  • Hot applied, reinforced modified asphalt 

  • Maximum temperature at brick / membrane interface is 190°F (88°C)

  • Resistant to many acids, alkalines, and salts

Data Sheet

MEMBRANES

Atlastic 55 Sheet

  • Fabric reinforced modified asphaltic sheet 

  • High temperature membrane for process vessels 

  • Chlor-alkali, phosphoric, sulfuric, fertilizer and pigment processing industries 

  • With proper design, process temperatures up to 325°F (163°C)

Data Sheet

MEMBRANES

Atlastic CT-30 Membrane

  • Trowel applied, modified urethane-asphalt 

  • Used with masonry brick construction, as a cleavage or waterproofing membrane 

  • Low odor 

  • Flexible from -10°F (-24°C) to 200°F (93°C)

Data Sheet

MEMBRANES

Membrane 88

  • Trowel applied, room temperature curing, urethane elastomer 

  • Used with masonry brick as a cleavage or waterproofing membrane, primarily in the pulp and paper industry 

  • Resistant to temperatures up to 170°F (77°C) 

  • Good for horizontal and vertical surfaces

Data Sheet

MEMBRANES

Chempruf 2101 Membrane System and Chempruf 2102 Membrane System

  • Composite of Furan based mortar and fabric reinforcement

  • Resistant to wide range of non-oxidizing acids, alkalies, salts, and organic solvents

  • Resistant up to 350°F. (177°C.)

Data Sheet

MEMBRANES

AFM-WM Waterproofing Membrane

  • 40 mil anti-fracture membrane 

  • Withstands cracks up to 1/4″ 

  • Fabric-faced and reinforced 

  • “Peel-n stick” sheet/rolls 

  • Excellent for patch and repair work

Data Sheet
bottom of page