• Used in conjunction with concrete construction
• Mechanically anchored into concrete substrate
• Leak-free primary and second containment and corrosion protection
• Leak detection systems available
• Expansion joints not required
• Available in five thermoplastic resins
• Chemical resistance
• Thermal resistance
• Impact and abrasion resistant
• Bridges cracks in concrete
• Easy installation
• On-site new construction
• Prefabricated construction available for new construction or retrofit
• Trenches, Sumps, Tanks, Drains
• Any configuration size or shape
• Built-in grating seat
• Conform to ASTM and DIN standards
• Welded by Certified Applicators
• Standard sheet thicknesses are 1/8" (3 mm.) and 3/16" (5 mm.)

Download Datasheets:

• Anchor-Lok Lining System
• Installation Guidelines
• Chemical Resistance Charts
  

• Epoxy resin
• Food and food by-products, acids, alkalies, salts, oils
• Organic acids, concentrated hydrochloric acid, 80% sulfuric acid, 25% phosphoric acid, 5% chromic acid
• USDA certifiable

Download Datasheet

• Hybrid epoxy system
• Ideal for lift stations, wet wells, manholes, clarifiers, digesters, grit chambers and other waste and water treatment structures.
• Can be used for floors, walls, ceilings, sumps, trenches and containment in a variety of industries.
• Sprayed vertically at thicknesses greater than 60 mils in one application.
• Resistant to many acids, alkalies, salts, oils, greases, food by-products.
• Resistant to 20% hydrochloric acid, 50% sulfuric acid and 25% phosphoric acid. It demonstrates excellent resistance to Hydrogen
• Sulfide and prevents microbial induced corrosion.
• Installed exclusively by ATLAS authorized applicators.

Download Datasheet

• Epoxy novolac resin, high solids
• 98% sulfuric acid, concentrated hydrochloric and phosphoric acids, 20% nitric acid, 30% chromic acid
• Organic solvents, dilute alkalies, alkaline hypochlorite solutions, dilute organic acids
• USDA certifiable

Download Datasheet

• Epoxy novolac resin, high solids, carbon filled Rezklad E-135S
• 70% hydrofluoric acid, fluoroboric acid, fluorides, 50% sodium hydroxide, hydrofluoric/nitric acid blends
• USDA certifiable

Download Datasheet

• Suitable for immersion
• Fiberglass flake reinforced, hi-build coatings
• 20 to 60 mil final thickness
• Brush, roller or spray applied
• USDA certifiable

Download Datasheets:

• Chempruf 120 Bisphenol Epoxy
• Chempruf 121 Novolac Epoxy
• Chempruf 130 Chlorendic Anhydride Polyester
• Chempruf 141 Novolac Vinyl Ester
• Chempruf 142
• Chemical Resistance Charts
  
  

• Fiberglass flake reinforced linings
• Suitable for immersion
• 60 to 100 mil final thickness
• Applied to concrete or steel substrates
• USDA Certifiable

Download Datasheets:

• Chempruf 1300 Chlorendic Anhydride Polyester
• Chempruf 1410 Novolac Vinyl Ester
• Chempruf 1420
• Chemical Resistance Charts
  
  

• Fiberglass mat reinforced linings
• Suitable for severe thermal and chemical conditions
• 1/8" final thickness
• Applied to concrete or steel substrates
• For fluorides and high alkaline environments, Chempruf 2201 C and 2211 C are available.
• For abrasive slurries and high velocity air containing particulates, use Chempruf 2001 AO Series
• USDA certifiable

Download Datasheets:

• Chempruf 2101 & 2102 Furfuryl Alcohol
• Chempruf 2201 Bisphenol Epoxy
• Chempruf 2211 Novolac Bisphenol F Epoxy
• Chempruf 2301 Chlorendic Anhydride Polyester
• Chempruf 2411 Novolac Vinyl Ester
• Chempruf 2421
• Chemical Resistance Charts
  
  

• Multiple layers of fiberglass mat reinforced linings
• Suitable for severe thermal and chemical conditions
• 1/8" final thickness
• Applied to concrete or steel substrates
• USDA certifiable

Download Datasheets:

• Chempruf 2300 Chlorendic Anhydride Polyester
• Chempruf 2410 Novolac Vinyl Ester
• Chempruf 2420
• Chemical Resistance Charts
  

• Hot applied, modified asphaltic
• Maximum temperature at brick / membrane interface is 150°F (66°C)

• Hot applied, modified asphaltic
• Maximum temperature at brick / membrane interface is 190°F (88°C)

• Fabric reinforced modified asphaltic sheet
• High temperature membrane for process vessels
• Chlor-alkali, phosphoric, sulfuric, fertilizer and pigment processing industries
• With proper design, process temperatures up to 325°F (163°C)

• Trowel applied, modified asphaltic
• Used with masonry brick construction, as a cleavage or waterproofing membrane
• Low odor
• Flexible from -10°F (-24°C) to 150°F (66°C)

• Trowel applied, room temperature curing, urethane elastomer
• Pulp and paper industry
• Used with masonry brick construction, as a cleavage or waterproofing membrane
• Resistant to temperatures up to 170°F (77°C)
• Good for horizontal and vertical surfaces

• 40 mil anti-fracture membrane
• Withstands cracks up to 1/4"
• Fabric-faced and reinforced
• "Peel-n stick" sheet/rolls
• Excellent for patch and repair work