New “Moisture Tolerant” Products

Atlas® GC Primer
REZKLAD® E-CONCRETE PRIMER MT
RED FURNANE® SETTING BED MT

Moisture in concrete, it is always a factor. Whether it is a new pour or an existing slab, it seems to be a problem on most jobs.

Not any more. Atlas has developed a series of products to eliminate the concern.

ATLAS® GC PRIMER (PDF data sheet)

• Can be used on “green concrete ” and existing concrete.
• Is a primer, primer sealer or concrete curing compound.
• Meets ASCM C309 requirements for use as a concrete curing compound.
• Can be applied to concrete without any surface preparation up to 36 hours after finishing (after 36 hours grit blasting is required).
• Does not need to be removed prior to further treatment.
• Can be brush, roller or spray applied.
• Is compatible with all Atlas epoxy setting beds, coatings, linings, and floor topping systems.

REZKLAD® E-CONCRETE PRIMER MT (PDF data sheet)

• Can be used on new concrete after 5 days cure time.
• Can be used on existing damp concrete, simply remove standing water.
• Can be brush or roller applied.
• Requires grit blasting or acid washing surface prep in order to achieve a tenacious bond.
• Is a primer compatible with all Atlas epoxy setting beds, coatings, linings, and floor topping systems.

And the same technology incorporated into a staple of the Atlas product line…

RED FURNANE® SETTING BED MT (PDF data sheet)

• Is a trowel applied setting bed or bond coat for floor tile, pavers and brick.
• Can be used on new concrete after 5 days cure time.
• Can be used on existing damp concrete, simply remove standing water.
• Requires grit blasting or acid washing surface prep in order to achieve a tenacious bond.

Is compatible with all Atlas mortars and grouts.

When struck with a hammer and chisel Red Furnane Setting Bed MT “pulls concrete,” demonstrating the outstanding bond achieved even to damp concrete.